Need some advice on stripping plastic HQ minis
Moderator: Moderators
- Vaeldroth ( 10 )
- New Trader
- Posts: 11
- Joined: Mon Dec 31, 2012 8:00 pm
- Location: Libertyville, IL, USA
- Contact:
Need some advice on stripping plastic HQ minis
Hi all,
I could use your advice. I've got a big pile of Hero Quest minis I'm stripping for trade fodder (or sale, as demand dictates). I'm using the Simple Green technique, but it seems some figures aren't releasing the paint as easily as others. I don't *think* I used any oil-based paints on these minis, but don't quote me on that.
I've soaked them 3 times in simple green for about 4 days at a time, and scrubbed them a bit with a toothbrush to loosen the paint a bit more after each soak.This worked great on all my metal minis, but the plastic results have been less than stellar.
Anyone have any better tips on getting the paint off these plastic minis?
I could use your advice. I've got a big pile of Hero Quest minis I'm stripping for trade fodder (or sale, as demand dictates). I'm using the Simple Green technique, but it seems some figures aren't releasing the paint as easily as others. I don't *think* I used any oil-based paints on these minis, but don't quote me on that.
I've soaked them 3 times in simple green for about 4 days at a time, and scrubbed them a bit with a toothbrush to loosen the paint a bit more after each soak.This worked great on all my metal minis, but the plastic results have been less than stellar.
Anyone have any better tips on getting the paint off these plastic minis?
Always looking for good/cheap 25mm heroic / 28mm true scale fantasy stuff I don't have.
- kturock ( 592 )
- 2014 Painting Challenge Champion!
- Posts: 4292
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Need some advice on stripping plastic HQ minis
purple power.. available at walmart.
i stipped testors paint off plastic eldar.. after a few days, even th super glue broke down.. but not the plastic.
it also works on resins.
i've used it on finecast as well as the resin spartan games uses for dystopian wars.
i stipped testors paint off plastic eldar.. after a few days, even th super glue broke down.. but not the plastic.
it also works on resins.
i've used it on finecast as well as the resin spartan games uses for dystopian wars.
Heh, I was called a Grognard. 
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
- Vaeldroth ( 10 )
- New Trader
- Posts: 11
- Joined: Mon Dec 31, 2012 8:00 pm
- Location: Libertyville, IL, USA
- Contact:
Re: Need some advice on stripping plastic HQ minis
I've used Purple Power on other things before, how does it compare to Simple Green?
Edit: just looked this up. Seems like Purple Power is a bit more caustic but still OK. I think I'll give that a shot.
Edit: just looked this up. Seems like Purple Power is a bit more caustic but still OK. I think I'll give that a shot.
Last edited by Vaeldroth on Thu Jan 24, 2013 9:34 pm, edited 2 times in total.
Always looking for good/cheap 25mm heroic / 28mm true scale fantasy stuff I don't have.
-
MattHoell ( 100 )
- Resident Trader
- Posts: 380
- Joined: Mon Feb 07, 2011 6:08 pm
- Location: Virginia, USA
Re: Need some advice on stripping plastic HQ minis
From personal experience Dawn Power Desolve is better than Purple Power and Simple green.
- kturock ( 592 )
- 2014 Painting Challenge Champion!
- Posts: 4292
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Need some advice on stripping plastic HQ minis
I trued Dawn. it didn't touch testors paint and barely removed GW paint. I got a bottle in my garage I'm trying to find a use for. The wife won't use it to clean.
Heh, I was called a Grognard. 
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
- Vaeldroth ( 10 )
- New Trader
- Posts: 11
- Joined: Mon Dec 31, 2012 8:00 pm
- Location: Libertyville, IL, USA
- Contact:
Re: Need some advice on stripping plastic HQ minis
I think I will try Purple Power. This last lot of minis I got, and some of the ones I dumbly painted with Testors, would not strip with the simple green.
Always looking for good/cheap 25mm heroic / 28mm true scale fantasy stuff I don't have.
- Vaeldroth ( 10 )
- New Trader
- Posts: 11
- Joined: Mon Dec 31, 2012 8:00 pm
- Location: Libertyville, IL, USA
- Contact:
Re: Need some advice on stripping plastic HQ minis
Well, I put the metal minis that need stripping into the Purple Power. Going to see in a few hours if that does the trick.
Always looking for good/cheap 25mm heroic / 28mm true scale fantasy stuff I don't have.
- kturock ( 592 )
- 2014 Painting Challenge Champion!
- Posts: 4292
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Need some advice on stripping plastic HQ minis
Heh, I was called a Grognard. 
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
Re: Need some advice on stripping plastic HQ minis
Purple power is great stuff....wear gloves though! Plastic...I've heard non-acetone nail polish remover can work but I'd look up information before trying.