Is there a safe way to strip resin?
Moderator: Moderators
Is there a safe way to strip resin?
looking at a really crappily painted resin model to pick up. Is there a safe way to strip resin.
-
s_o_r_r_o_w ( 312 )
- Moderator Without Title
- Posts: 2347
- Joined: Fri Aug 06, 1999 12:00 pm
- Location: Montreal, QC, Canada / US PO Box
Re: Is there a safe way to strip resin?
I figure you'd be ok with Fantastic.
I don't KNOW that you'd be ok.
I don't KNOW that you'd be ok.
I am always in the market for weird and wonderful GW oddbitz and ephemera. PM me if you have something old/weird/rare.
-----
No Finecast, please.
-----
READ THE RULES!
-----
Tips on shipping to Canada
-----
Bartertown Trade Vocabulary
-----
No Finecast, please.
-----
READ THE RULES!
-----
Tips on shipping to Canada
-----
Bartertown Trade Vocabulary
-
Ironhide ( 92 )
- Technicolor Messiah
- Posts: 6468
- Joined: Thu Oct 16, 2003 6:41 pm
- Location: Raleigh, NC
- Contact:
Re: Is there a safe way to strip resin?
Simple Green. It may soften the resin, but not so much you can't scrub the paint off with a toothbrush. Once it is stripped, cleaned, and rinsed off; it should go back to its former hardness after 24-48 hrs. YMMV.
"You can't always get what you want, but sometimes, you get what you need." - The Rolling Stones
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
-
Norseman ( 374 )
- Bartertown Watchman
- Posts: 2115
- Joined: Sat Jan 03, 2004 12:40 am
- Location: Ontario, Canada
- Contact:
Re: Is there a safe way to strip resin?
Do not use paint thinner or even non acetone nail polish remover. It will destroy it.
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Is there a safe way to strip resin?
Moving thread.
More appropriate for discussions.
Eric
More appropriate for discussions.
Eric
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
-
jul ( 382 )
- Bartertown Watchman
- Posts: 929
- Joined: Tue Jun 22, 2004 1:41 pm
- Location: Philadelphia, PA
Re: Is there a safe way to strip resin?
Simple green works fine, it may need a couple of bath though to get it clean properly.
Otherwise Brake Fluid is also pretty awesome on resin, but it's a pain to deal with in terms of safety and disposal...
Cheers
J
Otherwise Brake Fluid is also pretty awesome on resin, but it's a pain to deal with in terms of safety and disposal...
Cheers
J
Teacher Emma Bradford, who was excitedly buying 25th anniversary limited edition lead figures at her local Games Workshop, said: “A lot of people say this, but there's something about Warhammer games that just resonates with my vagina.
MagickalMemories wrote: I maintain the right to tease you about it endlessly, though! : )
viewtopic.php?f=111&t=130947kturock wrote:at least they're not in it for the poultry.
-
porkuslime ( 3094 )
- Gentleman Sadist
- Posts: 4342
- Joined: Sat Nov 27, 2004 6:20 pm
- Location: Central Ohio, USA
- Contact:
Re: Is there a safe way to strip resin?
I have had good luck with Purple Power on metal and plastic. Any ideas on how it would do on resin? (Especially really OLD resin from the mid-90's)?
-P
-P
2+2=5 for sufficiently large values of 2.
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
I use the Unofficial Porkuslime Trading Guidelines - if you have way less refs.. you ship first.
Folks I am awaiting a ref from.. Zack
USPS Mail Fraud
FBI Internet Crime Complaint Center
http://www.40korigins.com - Bringing 40k events to the Origins Game Fair!
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
I use the Unofficial Porkuslime Trading Guidelines - if you have way less refs.. you ship first.
Folks I am awaiting a ref from.. Zack
USPS Mail Fraud
FBI Internet Crime Complaint Center
http://www.40korigins.com - Bringing 40k events to the Origins Game Fair!
Re: Is there a safe way to strip resin?
thanks for ideas i'm getting a resin model soon and I may need to strip it. 
-
ancientsociety ( 842 )
- Millenium Trader
- Posts: 1654
- Joined: Tue May 23, 2006 2:46 pm
- Location: Chicago, IL
Re: Is there a safe way to strip resin?
I've had small resin bitz melt in Simple Green...so, maybe not...?Ironhide wrote:Simple Green. It may soften the resin, but not so much you can't scrub the paint off with a toothbrush. Once it is stripped, cleaned, and rinsed off; it should go back to its former hardness after 24-48 hrs. YMMV.
Trading Guidelines:
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
-
Ironhide ( 92 )
- Technicolor Messiah
- Posts: 6468
- Joined: Thu Oct 16, 2003 6:41 pm
- Location: Raleigh, NC
- Contact:
Re: Is there a safe way to strip resin?
How long did it sit in there?
"You can't always get what you want, but sometimes, you get what you need." - The Rolling Stones
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
-
ancientsociety ( 842 )
- Millenium Trader
- Posts: 1654
- Joined: Tue May 23, 2006 2:46 pm
- Location: Chicago, IL
Re: Is there a safe way to strip resin?
Overnight.Ironhide wrote:How long did it sit in there?
Granted it was FW Elysian bitz that were pretty small...but, yeah, checked them in the morning and was like "WTF!?"
Trading Guidelines:
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
-
Ironhide ( 92 )
- Technicolor Messiah
- Posts: 6468
- Joined: Thu Oct 16, 2003 6:41 pm
- Location: Raleigh, NC
- Contact:
Re: Is there a safe way to strip resin?
Yeah, I advise against small or thin resin bits being stripped, but the bigger/fatter pieces should be fine overnight.
"You can't always get what you want, but sometimes, you get what you need." - The Rolling Stones
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Is there a safe way to strip resin?
I don't understand the logic.
---Granted, I have precisely ZERO experience stripping minis---
If it'll melt small resin bits, why won't it eat small details off of larger pieces? Seems like it should be an 'all or nothing' kind of thing , to me.
Eric
---Granted, I have precisely ZERO experience stripping minis---
If it'll melt small resin bits, why won't it eat small details off of larger pieces? Seems like it should be an 'all or nothing' kind of thing , to me.
Eric
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
-
ancientsociety ( 842 )
- Millenium Trader
- Posts: 1654
- Joined: Tue May 23, 2006 2:46 pm
- Location: Chicago, IL
Re: Is there a safe way to strip resin?
I imagine it eats into the resin slightly, that's why larger pieces get soft. So maybe it softens smaller pieces to the point of melting...MagickalMemories wrote:I don't understand the logic.
---Granted, I have precisely ZERO experience stripping minis---
If it'll melt small resin bits, why won't it eat small details off of larger pieces? Seems like it should be an 'all or nothing' kind of thing , to me.
Eric
Trading Guidelines:
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
1. Lower rating ships first - even if I am purchasing.
2. If you agree to buy something, you have 72hrs. in which to pay. If payment is not received in 72hrs., I will automatically post a Non-Payment/Backout thread.
3. Refs are left upon positive receipt of goods, NEVER beforehand!
4. I accept Paypal & USPS money orders and charge for shipping AT COST. I make no profit from it.
5. I trade NIB/new models at retail.
-
Ironhide ( 92 )
- Technicolor Messiah
- Posts: 6468
- Joined: Thu Oct 16, 2003 6:41 pm
- Location: Raleigh, NC
- Contact:
Re: Is there a safe way to strip resin?
That was my understanding.ancientsociety wrote:I imagine it eats into the resin slightly, that's why larger pieces get soft. So maybe it softens smaller pieces to the point of melting...MagickalMemories wrote:I don't understand the logic.
---Granted, I have precisely ZERO experience stripping minis---
If it'll melt small resin bits, why won't it eat small details off of larger pieces? Seems like it should be an 'all or nothing' kind of thing , to me.
Eric
"You can't always get what you want, but sometimes, you get what you need." - The Rolling Stones
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.