I don't play WHFB or know much about most of the models in the range.
Can anyone tell me the approximate size on this bit:
http://www.ebay.com/itm/WARHAMMER-BITS- ... 4cfa9dbc32
Specifically, I'm trying to find out how it's size relates to a 40K plying base and if it will fit FULLY on the base, or if it will overlap at any point (and by how much). So, if you've got any sort of a size comparison pic, all the better.
Thanks in advance!
Eric
Warhammer (WHFB) Bit size inquiry
Moderator: Moderators
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Warhammer (WHFB) Bit size inquiry
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Warhammer (WHFB) Bit size inquiry
Semi/kind of/partially related/unrelated question...
Does anyone know the diameter on the two roughly circular bits at the top of this pic?
http://www.ebay.com/itm/WARHAMMER-BITS- ... 53ec23e806
For the record:
I'm scouring feebay for bits to use on my 100% converted Necron Army. The first auction would make interesting decorations for a flyer base and this would make an interesting cannon of some sort if I replaced the Warpstone piece on the front.
Thanks.
Eric
Does anyone know the diameter on the two roughly circular bits at the top of this pic?
http://www.ebay.com/itm/WARHAMMER-BITS- ... 53ec23e806
For the record:
I'm scouring feebay for bits to use on my 100% converted Necron Army. The first auction would make interesting decorations for a flyer base and this would make an interesting cannon of some sort if I replaced the Warpstone piece on the front.
Thanks.
Eric
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
-
wookieegunner ( 66 )
- Journeyman Trader
- Posts: 218
- Joined: Tue Feb 13, 2007 4:04 am
Re: Warhammer (WHFB) Bit size inquiry
Based on the Sprue Pic here:
http://bitzbarn.com/oscommerce/catalog/ ... ts_id=9285
That lizard piece looks about the same size as an Ogre's Torso, so I would say not.
http://bitzbarn.com/oscommerce/catalog/ ... ts_id=9285
That lizard piece looks about the same size as an Ogre's Torso, so I would say not.
By trading with me you agree that all signature based trade rules are not in force. If it isn't in the PM thread then it doesn't apply.
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Warhammer (WHFB) Bit size inquiry
Thanks, wg.
Of course, that makes it worth FAR less than $4.50 to me! : )
Eric
Of course, that makes it worth FAR less than $4.50 to me! : )
Eric
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
-
Xoan ( 158 )
- Journeyman Trader
- Posts: 262
- Joined: Sun Sep 07, 2008 4:31 pm
- Location: Garden City, Kansas or 3 miles from the middle of no where
- Contact:
Re: Warhammer (WHFB) Bit size inquiry
MagickalMemories wrote:I don't play WHFB or know much about most of the models in the range.
Can anyone tell me the approximate size on this bit:
http://www.ebay.com/itm/WARHAMMER-BITS- ... 4cfa9dbc32
Specifically, I'm trying to find out how it's size relates to a 40K plying base and if it will fit FULLY on the base, or if it will overlap at any point (and by how much). So, if you've got any sort of a size comparison pic, all the better.
Thanks in advance!
Eric
It would be hard to fit on a 40 mm base, but should fit well on a 50 mm base though it would dominate it
I will ship out of the US please let me know within the first post where you are if not in the US, it does affect how the trade goes some times. Thanks Also lower rank ships first, and I always want to both use and receive a tracking number so I can know when to expect things.
-
Xoan ( 158 )
- Journeyman Trader
- Posts: 262
- Joined: Sun Sep 07, 2008 4:31 pm
- Location: Garden City, Kansas or 3 miles from the middle of no where
- Contact:
Re: Warhammer (WHFB) Bit size inquiry
MagickalMemories wrote:Semi/kind of/partially related/unrelated question...
Does anyone know the diameter on the two roughly circular bits at the top of this pic?
http://www.ebay.com/itm/WARHAMMER-BITS- ... 53ec23e806
For the record:
I'm scouring feebay for bits to use on my 100% converted Necron Army. The first auction would make interesting decorations for a flyer base and this would make an interesting cannon of some sort if I replaced the Warpstone piece on the front.
Thanks.
Eric
Well the length of this part is like 3.5 inches long as I remember it, so it is fairly narrow, it is designed to be a cannon like weapon for rat-like creatures. It might be a little big as a staff of some sort if that is your plan
I will ship out of the US please let me know within the first post where you are if not in the US, it does affect how the trade goes some times. Thanks Also lower rank ships first, and I always want to both use and receive a tracking number so I can know when to expect things.