Can you prime over painted minis?
Moderator: Moderators
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
I didn't think about that! I bet if you just got some no named brand kitty litter, it wouldn't absorb anything. I will have to give that a try. Thanks Starship.
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
- kturock ( 590 )
- 2014 Painting Challenge Champion!
- Posts: 4252
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Can you prime over painted minis?
we have 8 cats that allow us in their house. we've tried every type of litter. currently we're using the pine pieces.
when we used the clay litter, we I still have in the garage for spills, i glued it to the base with white glue & water mix.
it sucked up the paint when I put down the base coat.
I found I can buy basing materials from craft stores, like Michaels for alot less than GW.
It's clean/sanatized and comes in a variety of colors & textures.
when we used the clay litter, we I still have in the garage for spills, i glued it to the base with white glue & water mix.
it sucked up the paint when I put down the base coat.
I found I can buy basing materials from craft stores, like Michaels for alot less than GW.
It's clean/sanatized and comes in a variety of colors & textures.
Heh, I was called a Grognard.
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
- starship trooper ( 20 )
- Journeyman Trader
- Posts: 125
- Joined: Mon Mar 14, 2011 8:19 pm
- Location: Canandaigua NY
- Contact:
Re: Can you prime over painted minis?
I use no sent ally cat on my warhammer... here it is in action on the table I built. Its all along the road and river edge. Works just as well for me on the bases.kturock wrote:when we used the clay litter, we I still have in the garage for spills, i glued it to the base with white glue & water mix.
it sucked up the paint when I put down the base coat.
You do not have the required permissions to view the files attached to this post.
~ We receive all we venture to give...
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
LOL! Who would have thought that your gaming table would be covered with kitty litter! I guess there is alot about cutting costs and stuff that I have yet to learn.
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
Now can you use sand? Could you flock a gaming board with it and paint it?
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
- Azbag#1 ( 132 )
- Journeyman Trader
- Posts: 107
- Joined: Sat Apr 26, 2008 12:42 pm
- Location: Eau Claire, WI
Re: Can you prime over painted minis?
Here's the method that I use on both metal and plastic models. It doesn't ruin any detail and it's pretty easy to do.
Easy Paint Removal
1. Get some Castrol Engine Degreaser from Wal-mart. It’s in a purple 1 gallon jug. It generally runs around 7 to 9 dollars for the jug.
2. Place the models in a sealable container and fill the jar up about ¾ full. It should completely cover the models. I’ve found that a large peanut butter jar or Sour Cream container works well.
3. Close the container and let it sit for 5 or 6 hours.
4. Use a pair of latex gloves or dishwashing gloves to handle the models and try to find and use a pair of safety glasses. (This stuff could really hurt your eyes)
5. Pull the models out of the jar and pour a little of the sol’n that was in the jar into another open container like a bowl that’s no longer needed.
6. Take a old toothbrush and start scrubbing. You can use the sol’n in the bowl as a dip to put more on the toothbrush.
7. Rinse the models off with hot water and scrub them as needed.
8. If some paint didn’t come off then just put them back into the “dunking jar” again and let them sit for some more time.
9. This stuff even works on spray paint. The biggest hit for me on it was that it does not damage the GW plastic models. I cleaned up a squad of SM assault troops and it still left the details of the grenades on.
10. It may break down some types of glue but that would only require a simple re-glue and it’s good as new.
11. Once you are satisfied with the model I would wash it in warm soapy water just to make sure there is no residue left.
12. Prime and paint away.
Easy Paint Removal
1. Get some Castrol Engine Degreaser from Wal-mart. It’s in a purple 1 gallon jug. It generally runs around 7 to 9 dollars for the jug.
2. Place the models in a sealable container and fill the jar up about ¾ full. It should completely cover the models. I’ve found that a large peanut butter jar or Sour Cream container works well.
3. Close the container and let it sit for 5 or 6 hours.
4. Use a pair of latex gloves or dishwashing gloves to handle the models and try to find and use a pair of safety glasses. (This stuff could really hurt your eyes)
5. Pull the models out of the jar and pour a little of the sol’n that was in the jar into another open container like a bowl that’s no longer needed.
6. Take a old toothbrush and start scrubbing. You can use the sol’n in the bowl as a dip to put more on the toothbrush.
7. Rinse the models off with hot water and scrub them as needed.
8. If some paint didn’t come off then just put them back into the “dunking jar” again and let them sit for some more time.
9. This stuff even works on spray paint. The biggest hit for me on it was that it does not damage the GW plastic models. I cleaned up a squad of SM assault troops and it still left the details of the grenades on.
10. It may break down some types of glue but that would only require a simple re-glue and it’s good as new.
11. Once you are satisfied with the model I would wash it in warm soapy water just to make sure there is no residue left.
12. Prime and paint away.
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
Hey thanks for that man! That sounds like a nice easy way to do it. I will have to give it a shot. Thanks again!
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
- starship trooper ( 20 )
- Journeyman Trader
- Posts: 125
- Joined: Mon Mar 14, 2011 8:19 pm
- Location: Canandaigua NY
- Contact:
Re: Can you prime over painted minis?
For what your trying to do you should just get a can of the texture spray from walmart for like $3. They have stone, rock, and sand.. looks and feels like rock, sand ext.... then you can just paint it what ever colors or patterns you want.CMSheats wrote:Now can you use sand? Could you flock a gaming board with it and paint it?
~ We receive all we venture to give...
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
Ok. Great! I will have to pick some of that up. Thanks!
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
- kturock ( 590 )
- 2014 Painting Challenge Champion!
- Posts: 4252
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Can you prime over painted minis?
You can also buy the stuff that's used for 'knock-down' ceilings in houses at Lowe's, Home Depot & other home improvement stores.
Heh, I was called a Grognard.
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
I just thought of it, would that spray foam that people use around hoses and stuff work for hills? Like could you spray it and smooth it out?
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
- kturock ( 590 )
- 2014 Painting Challenge Champion!
- Posts: 4252
- Joined: Sun Nov 20, 2005 12:55 am
- Location: wpb., florida
Re: Can you prime over painted minis?
CMSheats wrote:I just thought of it, would that spray foam that people use around hoses and stuff work for hills? Like could you spray it and smooth it out?
nope.
Better to buy sheets of 1 inch stryofoam from the home stores.
Heh, I was called a Grognard.
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
MY ALWAYS TRADE LIST: Scar Weaver, wmeredith, bloodstrike, tionas, wetstone, Frank Austin, akum, SW-DABOSS, Galador, nahatley, Joeb, Squeakula, mongse, con-fusion, basaint, jugglingfool, IsaiahTheBarbarian, Purple40k, Standard of War, BA-Best .
USPS Postal Inspectors: 1-877-876-2455
USPS complaint center delivery problem, lost mail, track & confirm, etc. 1-800-275-8777
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
Ok, well thanks for letting me know.
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine
-
- Technicolor Messiah
- Posts: 6468
- Joined: Thu Oct 16, 2003 6:41 pm
- Location: Raleigh, NC
- Contact:
Re: Can you prime over painted minis?
When using this method, do not leave plastic models in the solution for too long as it will soften the plastic; and prolonged exposure will actually melt them. Also, if plastic models are primed with some Krylon brands, the primer will not come off no matter what you use; as the primer will bond with the plastic.Azbag#1 wrote:Here's the method that I use on both metal and plastic models. It doesn't ruin any detail and it's pretty easy to do.
Easy Paint Removal
1. Get some Castrol Engine Degreaser from Wal-mart. It’s in a purple 1 gallon jug. It generally runs around 7 to 9 dollars for the jug.
2. Place the models in a sealable container and fill the jar up about ¾ full. It should completely cover the models. I’ve found that a large peanut butter jar or Sour Cream container works well.
3. Close the container and let it sit for 5 or 6 hours.
4. Use a pair of latex gloves or dishwashing gloves to handle the models and try to find and use a pair of safety glasses. (This stuff could really hurt your eyes)
5. Pull the models out of the jar and pour a little of the sol’n that was in the jar into another open container like a bowl that’s no longer needed.
6. Take a old toothbrush and start scrubbing. You can use the sol’n in the bowl as a dip to put more on the toothbrush.
7. Rinse the models off with hot water and scrub them as needed.
8. If some paint didn’t come off then just put them back into the “dunking jar” again and let them sit for some more time.
9. This stuff even works on spray paint. The biggest hit for me on it was that it does not damage the GW plastic models. I cleaned up a squad of SM assault troops and it still left the details of the grenades on.
10. It may break down some types of glue but that would only require a simple re-glue and it’s good as new.
11. Once you are satisfied with the model I would wash it in warm soapy water just to make sure there is no residue left.
12. Prime and paint away.
"You can't always get what you want, but sometimes, you get what you need." - The Rolling Stones
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
FBI Internet Fraud Center http://www.ic3.gov/complaint/
USPS Mail Fraud http://postalinspectors.uspis.gov/forms ... laint.aspx
If you don't have your Location listed in your User Control Panel, why not take a second and update it? It will let your trading partners know where you are from the beginning.
-
- Millenium Trader
- Posts: 1515
- Joined: Wed Jun 29, 2011 6:16 pm
- Location: Tallahassee, Fl
Re: Can you prime over painted minis?
Like how long is to long?
"We should have a trading contest! We see who can complete the most trades in a designated amount of-- oops, Porkuslime won before I finished the sentence." - extropymine